Genelec - 8030.LSE Power Pak -5 8030A Monitors w/the 7060A Subwoofer
MFG# 8030LSE Power Pak SKU# GENELE8030LSEPowerPak
Regular Price: $7,150.00
You Save: $1,430.03(20% off)
5,719.97
QTY:
The Genelec 8030A.LSE Power Pak is comprised of 5 8030A nearfield monitors matched with the 7060A subwoofer. The 8030A is a small, bi-amplified, 2-way speaker with twin 40 Watt amplifiers and shielded 5" and .75" Low and High frequency drivers, housed in a sturdy die-cast aluminum enclosure, designed for use in any professional audio production environment where space considerations are paramount.
The two unique features of the 8030A are the MDE(Minimum Diffraction Enclosure) cabinet design, and the Iso-Pod(Isolation Positioner/Decoupler) speaker mount. The MDE design, with it’s rounded, curved cabinet edges, improves spatial imaging and playback consistency. The Iso-Pod is a positioning mount that raises and isolates the speaker from the rumble and resonances often caused by surface placement.
The two 8030A rear panel connectors are 3-pin XLR’s, providing both an input, and an output, for daisy-chain 5.1 surround expansion needs, or use with a subwoofer. A modest complement of tone control DIP switches allows for adjustment to the room’s acoustic environment, and a bass port improves low end reproduction.
The 7060A subwoofer features a 10" driver, powered by a robust 120 Watt amplifier, housed in Genelec’s proprietary LSE(Laminar Spiral Enclosure) bass reflex cabinet. This design combines minimized enclosure noise with tight, consistent signal dispersion, a characteristic of laminar. The rear panel provides a bass management unit featuring 6 separate XLR I/O’s and a pair of summed signal outputs. The amplifier unit, with active crossover filters and driver overload protection, is adjacent to an ample set of tone, phase and filter controls.
The 8030A.LSE Power Pak is a worthy and progressive solution as a 5.1 Surround monitoring system for studio and A/V post or multi-media applications.
FEATURES
Active 5.1 Surround monitoring system with unique design and specially matched subwoofer
Magnetically shielded for use in close proximity to computer monitors
Minimum Diffraction Enclosure(MDE) design with rounded edges curved front and sides for smooth frequency response and clear spatial imaging, minimal cabinet edge wave diffraction
LSE (Laminar Spiral Enclosure) bass reflex subwoofer cabinet design for minimized turbulence noise and optimum signal flow
Directivity Control Waveguide(DCW)and rear panel reflex port design for accurate and balanced wave dispersion , durable die-cast aluminum cabinet construction
Isolation Position/Decoupler(Iso-Pod) rubber speaker mount allows for precise vertical or horizontal speaker positioning, separates speaker from placement surface, eliminating rumble and other aberrant vibration related resonances
Metal grille covering for monitor drivers
Front Panel power switch and volume controls
Integrated monitor rear support points for wall and floor stands, 3/8" threading for enclosure cabinet base mounting
Balanced XLR inputs, outputs for all speakers
Balanced XLR output for daisy-chaining multiple units or connection to Subwoofer
Rear panel Treble and Bass Tilt, Bass Roll-Off tone control switches for optimizing monitor speaker to acoustic character of room environment
29 Hz lower cutoff frequency for subwoofer
Selectable 85/120 Hz lowpass filter switch and 0/+10dB LFE sensitivity switch for subwoofer
7 separate control switches for phase adjustment, bass roll-off and tone control
Transparent Overload Protection circuitry for all speakers
Switchable power supply for international use
Low Frequency Driver: 5"Cone, 10" Driver(Subwoofer)
Maximum Sound Pressure Level (SPL) >108 db @ 1 Meter, 113 dB @ 1 Meter(Subwoofer)
Controls and Indicators: Front Panel- 1 x Rotary Volume Control, 1 x Power On/Off Button, 1 x Green Power On LED Indicator Light: Rear Panel: 2 x Bass Roll-Off Switches(On/Off), 1 x 0 to -2 dB @ 15 kHz Treble Tilt DIP Switch, 1 x -6 dB @ 85 Hz Bass Roll-Off DIP Switch, 2 x 0 to -6 dB @ 100 Hz Bass Tilt DIP Switches
Subwoofer Rear Panel: 1 x +12/-6 dBu Input Sensitivity Switch, 1 x Bypass Switch, 1 x 85/120 Hz LFE Bandwidth Switch, 1 x 0/+10 dB LFE Sensitivity Switch, 1 x LFE Channel Redirect Switch, 1 x Sum In Mode Switch, 1 x Test Tone Phase Adjust Switch, 1 x 4-position Bass Roll-Off Switch, 1 x 4-position Phase Switch 1 x Power Switch, 1 x 3-Pin XLR Female Input, Balanced. 1 x 3-Pin XLR Male Output, Balanced
Subwoofer: 1 x 3-Pin XLR Female LFE/SUM In, Balanced, 1 x 3-Pin XLR Male SUM Out, Balanced, 3 x 3-Pin XLR Female L/C/R Front In, Balanced, 3 x 3-Pin XLR Female L/C/R Rear In, Balanced, 3 x 3-Pin XLR Male L/C/R Front Out, Balanced, 3 x 3-Pin XLR Male L/C/R Rear Out, Balanced 1 x 1/4" TS Phone Bypass In, 1 x RJ-11 Remote In
Shielded: Yes
WHATS IN THE BOX
Iso-Pod Speaker Base
6 x Power Cables
Owner’s Manual
DIMENSIONS & WEIGHT
(HxWxD): 11.2 x 7.4 x 7" (285 x 189 x 178mm) 20.7 x 18.1 x 14.2" (527 x 462 x 360 mm)(Subwoofer)
5,719.97
